|
Wuhan Huajin Co., Ltd.
|
17cm LCD display Noise Figure Analyzer for wave amplifier attenuator / mixer
| Place of Origin: | Guangdong, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
AV3985 Noise Figure Analyzer Flexible And Visual User I
AV3985 Noise Figure Analyzer Flexible And Visual User Interface
Product Overview:
AV3985 Millimeter-wave Noise Figure Analyzer adopts several high and new technologies such as wideband track pre-selection, wideband low-noise millimeter-wave amplification, multi-functional integrated miniature design, high-speed sweep measurement, embedded PC hardware platform, Windows 2000 software platform, and Chinese interface, which is easy of realizing high-precision measurement of noise figure and gain in linear or quasi-linear network of microwave and millimeter-wave at 10 MHz ~ 40 GHz. It is widely used in the measurement of noise figure and gain of microwave and millimeter-wave amplifier, mixer, attenuator, etc.
Main Features:
- True color LCD, in dual-channel display of curve of noise figure and gain, etc. many parameters varying with frequency
- Optional bandwidth at six resolutions
- Perfect measurement function, allowing achievement of noise figure and gain measurement of amplifier, up and down converter, etc. components or system
- With Loss compensation function, compensating the loss before and after DUT in the form of fixing, table and combination, for addressing the testing difficulty of millimeter-wave tube requiring deembedding
- Abundant peripheral interfaces with high reusability
- Available in dual noise source drive capability, supporting both common noise source and intelligent noise source, plug-and-play for the latter with ENR (excess noise ratio) automatic loading
Wide frequency coverage, compact system configuration
With wide frequency coverage, this instrument can measure the noise figure and gain within the frequency range from 10MHz to 40 GHz, compact design and good repeatability of system could minimize the error and uncertainty resulted from system setup. The integrated model replaces the complex testing system divided into microwave and millimeter-wave.
Perfect loss compensation
Loss compensation function can compensate the loss in channels before and after DUT in the form of fixing, table and combination, which greatly facilitates testing on the microwave and millimeter-wave tube core requiring deembedding.
Technical Specifications
| Frequency Range |
10MHz~40GHz |
|
|
Measurement Bandwidth |
4MHz, 2MHz, 1MHz, 400kHz, 200kHz, 100kHz |
|
|
Frequency Tuning Accuracy |
4MHz: ± (Frequency Reference Error+100kHz) 10MHz~3GHz |
|
|
Noise Figure Measurement Range |
0~30dB (Noise Source ENR:14dB~16dB) |
|
|
Noise Figure Measurement Uncertainty |
±<0.15dB (Noise Source ENR:14dB~16dB) |
|
|
Gain Measurement Range |
-20dB ~ +40dB |
|
|
Gain Measurement Uncertainty |
±<0.17dB |
|
|
This Unit Noise Figure |
<7.5dB 10MHz~500MHz |
|
|
Frequency Tuning Accuracy |
4MHz: ± (Frequency Reference Error +100kHz) 10MHz~3GHz |
|
|
Jitter |
<0.17dB (Y Factor Deviation) |
|
|
Input connector type |
2.4mm (male) |
|
|
Input Port Standing Wave Ratio |
<1.65:1 10MHz~500MHz |
|
|
Wuhan Huajin Co., Ltd. [China (Mainland)]
Business Type:Manufacturer | ||
